搜索 社区服务 统计排行 帮助
  • 988阅读
  • 7回复

[重要]BFrame不一定=好画面!制作人员请注意

楼层直达
级别: 侠客
注册时间:
2002-10-24
在线时间:
0小时
发帖:
388
请看下面一段话(摘取自http://edu.bnhof.de/pipermail/xvid-devel/2003-January/001942.html, xvid.org mailing list):
> > d) Set B-frames only when helpful
> >
> > A clip can benefit very much from Bframes, or the results can be horrible.
> > In one of the VQEG test clips, I had a PSNR drop from 46.05 to 41.40
> > (-4.95db) just because of activating 1 bframe! Average(!) quantizers
> > jumped from 2.26 to 5.22. But there is also a clip where PSNR was
> > increased from 34.3 to 35.5 (+1.2dB). XVID already has a dynamic test for
> > this, but it's a very simple check...
> >
> > Proposal #4: Implement a better criterion for dynamic bframes.
> > (first we have to find one, but if necessary, just use brute force)
>
> I'm not sure if the benefits of b-frames can be measured by simple PSNR
> comparisons: Of course the PSNR of bframes is generally lower than if we had
> coded a pframe instead (simply because bframe quant is higher), however
> bframes' lower quality don't influence the remaining picture sequence
> (because bframes are not used as reference). If we now assume normal viewing
> conditions (a video played back at ~25 fps), the quality decrease when a
> bframe is presented for only a short time (1/25s) might not be noticed at
> all.

In a typical IBPBPB GOP half of all frames are B-frames. So with the same
argument as yours I'd say, quality of all other frames doesn't matter,
because they are presented only for a short while.
I'd say the "weight" of B-frames quality for _viewing_ is the same as of
the others. For encoding of error it is not, but that's taken care of by
higher quant for Bframes and ratecontrol. Average quant might not be a
good measurement in bframes sequences, but average PSNR I'd say is.

Btw. in later tests I noticed, that ffmpeg's overall quality with Bframes
get much better when vhq is enabled in ffmpeg, so their mode decision in
bframes might simply be very bad. Still, its a fact that sometimes
bframes are beneficial and sometimes they are not, and I really have to
adapt the test-script to XVID.


> So for a fixed quant encoding with maybe 5 - 10 bframes/sec, the
> perceived video quality might stay the same while we have a noticable
> decrease in file size at the same time.

5-10 bframes per second is rarely the case, unless you already have a
dynamic mode where bframes are supressed. Typical should be 12.5-15
bframes per second (maxbframes=1), or even 18-20 (maxbframes=2).

> Of course there might be video clips, where b-frames are really doing harm
> (and not only PSNR-wise). So for example if a PBP sequence (viewing order)
> is not significantly smaller than a corresponding PPP sequence, bframes
> should of course not be used (well, I guess I don't tell you anything new
> here ;-))

I would say: Let's take ratecontrol take care of that (fix quant encoding
is difficult for bframes, espcially because their quant isn't the one you
choose as fixed) and watch the result.


所以,能不能请POPGO的制作人员们把这些因素都考虑到呢?

May the force be with you!
级别: 版主
注册时间:
2002-10-16
在线时间:
1小时
发帖:
1143
只看该作者 7楼 发表于: 2003-03-25
压的人都经常更新Codec,看的当然也要更新咯。
不要以为装了XviD就可以了,要经常更新。
懒的人就用FFDShow

级别: 侠客
注册时间:
2002-10-24
在线时间:
0小时
发帖:
388
只看该作者 6楼 发表于: 2003-03-25
我是觉得POPGO用了BFRAME以后,出现了无数的有关Bframe播放的问题的贴子,而且频频不断。。。

May the force be with you!
级别: 元老
注册时间:
2001-11-21
在线时间:
0小时
发帖:
3767
只看该作者 5楼 发表于: 2003-03-25
汗~~~誰說過"BFrame=好画面"....???
只是在相同的source下 XviD-BF所提供的畫質和XviD/DivX幾乎是一樣
但是檔案可以縮的更小 較方便刻盤...
级别: 新手上路
注册时间:
2002-12-26
在线时间:
0小时
发帖:
14
只看该作者 4楼 发表于: 2003-03-25
好难明啊,不过我会慢慢的学的
级别: 新手上路
注册时间:
2001-11-21
在线时间:
0小时
发帖:
258
只看该作者 3楼 发表于: 2003-03-25
漏了个很大的前提: 相同的文件大小。
这个是测试极限PSNR的。
按这个无视大小的说法,就不要做DVDrip了,都上VOB算了。
现在的BF发展,让以前的200MB的大小能达到一个相当好的水平。
170~180MB一般就够了。

级别: 侠客
注册时间:
2002-10-24
在线时间:
0小时
发帖:
388
只看该作者 2楼 发表于: 2003-03-25
我现在得睡睡,晚上1点半了,明天翻吧

May the force be with you!
级别: 骑士
注册时间:
2003-01-08
在线时间:
0小时
发帖:
1254
只看该作者 1楼 发表于: 2003-03-25
看不懂!能简单翻译一下吗
谢谢

快速回复

限150 字节
上一个 下一个