[推荐]eMule0.29b-sivka.v9b1 发布（sivka.athlazan下载更新v2.14e）|『eDonkey交流区』

jackytj

级别: 新手上路

注册时间:: 2003-03-24

在线时间:: 0小时

发帖:: 269

只看楼主更多操作楼主发表于: 2003-07-01

终于可以升级了

eMule0.29b-sivka.v9b1

最新的sivka.athlazan:
eMule0.29b-sivka.v8b2-athlazan.v2.14e
虽然不是基于最新的sivka，但也非常好用

我认为比较实用的功能都用蓝色表示

复制代码

FEATURES:
= Reconnect on LowID [Tarod/sivka]
= AntiCrash/AntiFake handling [Vorlost/sivka] (see below)
= don't interrupt upload if waiting queue empty or friend-slot [P.O.W./sivka]
= new upload priorities and tweaked credit system - report you experience !!!
= Save/Load sources [enkeyDEV(Ottavio84) -New SLS-] (see below)
[color=blue]= now you can modify MIN and MAX upload slots 2...100[/color]
= Maximum allowed Queue Rating <= X, you can set value X = 5...5000.
= download Stops Prematurely, if send full chuncks is enabled [jicxicmic/Maella]{11.03.03}
= AutoPriority based on Valid Sources: HIGH = 0...40, NORMAL = 41...160, LOW = 161...1000 (see below)
[color=blue]= extended handling for NNS, FQS and HighQRS sources (see below)[/color]
= Keep Ip-filtered Clients Out Of Queues [Harvey56]
= fakecheck Donkey-Fakes.de.vu + Jigle.com [Interceptor]
[color=blue]= Defeat 0-filled Part Senders [(Idea of xrmb) / Maella]{18.03.03}[/color]
[color=blue]= Anti-/Community Array (see below)[/color]
= Valid Sources, Friends and Community User can always entry the waiting queue
[color=blue]= A4AF-counter ahead of user nick
= "Swap A4Af to any other file" (I had implemented it for testing the routine, if it not usefull I will remove it)
= now paused files use the "Swap A4Af to another file" function
= new (two way) A4AF handling made by sivka [based on ideas from Tarod/enkeyDEV(Ottavio84)][/color]
= possiblity to see requested downloading and uploading files from remote client
= Support for tag ET_MOD_VERSION 0x55 [Maella]
= Overwrite Already Downloaded Parts And Chunk [emarc]
= multiple_instances [khaos]
= Disable Sources eXchange [Tarod]
= sends sources with LowID that are in same sever that client is requesting sources [Tarod]
= do not send incomplete established conns. to avoid sending no valid sources [Tarod]
= Webservices Menuseparator, searches for -,- and adds separator menu [rasmoe/SlugFiller]
[color=blue]= client refresh [Fusion Team][/color]
= spanish tradiction [ikabot]
= update friends list on add [InterCeptor]
[color=blue]FEATURE: Anti-/Community Array
= Communities Credits are pushed by 2x and Anti-Communities Crediets reduce by 2x
= AntiCommunity user don't get reward of Credits
= now you can push multiple Communities
= you can separate Communities with "|"
= allowed max 255 characters[/color]
FEATURE: AntiFake handling (read again, was changed in v9b1)
= add "UserFakedHisPort" to head of clients name, that tried to fake his port
= banning for fake port, can be manual UnBan but not Auto-UnBan,
= you can see messages only in verbose modus.
= the cheater will never see the waitqueue from inside
FEATURE: AutoPriority based on Valid Sources
= on hard limit column you can see Valid Sources/Hard Limit
= variable Hard Limit with auto-function (50...1000, in-/decrease depend on priority of DL-file),
= updating of Hard Limit is depended on Timer value,
= Hard Limit per file will be initiate with value from usual used Hard Limit in preferences
= PRIORITY HIGH or AUTO[HIGH]:
Valid Sources = 10...20, AutoPR & ManualPR => AutoHL = 50...125, growth about 25%
Valid Sources = 21...30, AutoPR & ManualPR => AutoHL = 84...144, growth about 20%
Valid Sources = 31...40, AutoPR => AutoHL = 103...154, growth about 15%
Valid Sources = 41...260, ManualPR => AutoHL = 103...1000, growth about 15%
Otherwise AutoHL decrease about 1% every TimerValue to 50.
= PRIORITY NORMAL or AUTO[NORMAL]:
Valid Sources = 17...55, ManualPR => AutoHL = 50...172, growth about 10%
Valid Sources = 41...55, AutoPR => AutoHL = 118...172, growth about 10%
Valid Sources = 56...75, AutoPR & ManualPR => AutoHL = 140...203, growth about 9%
Valid Sources = 76...100, AutoPR & ManualPR => AutoHL = 169...239, growth about 8%
Valid Sources = 101...130, AutoPR & ManualPR => AutoHL = 202...278, growth about 7%
Valid Sources = 131...160, AutoPR => AutoHL = 238...307, growth about 6%
Valid Sources = 161...519, ManualPR => AutoHL = 238...1000, growth about 6%
Otherwise AutoHL decrease about 1% every TimerValue to 50.
= PRIORITY LOW or AUTO[LOW]:
Valid Sources = 30...195, ManualPR => AutoHL = 50...341, growth about 5%
Valid Sources = 161...195, AutoPR => AutoHL = 268...341, growth about 5%
Valid Sources = 196...235, AutoPR & ManualPR => AutoHL = 301...375, growth about 4%
Valid Sources = 236...280, AutoPR & ManualPR => AutoHL = 337...412, growth about 3%
Valid Sources = 281...330, AutoPR & ManualPR => AutoHL = 374...448, growth about 2%
Valid Sources = 331...792, AutoPR & ManualPR => AutoHL = 413...1000, growth about 1%
Otherwise AutoHL decrease about 1% every TimerValue to 50.
[color=blue]FEATURE: extended handling for NNS, FQS and HighQRS sources
= Separat Timers for AutoHL, AutoNNS, AutoFQS and AutoHQRS (0...60 sec)
= Not Needed Sources (NNS)
Auto-Drop NNS only from DL Queue
Auto-Drop if NNS > X%
you can set for X% = 50%...100%,
only one NNS every Timer unit, Timer = 0 drop all immediately,
Auto-Drop and Manual-Drop NNS,
trying to swap to another file,
CleanUp and Manual-Drop NNS have not restrictions (clean all NNS),
CleanUp and Manual-Drop NNS with enableable Beep (acoustic signal on droping NNS).
= Full Queue Sources (FQS)
Auto-Drop FQS only from DL Queue,
Auto-Drop if FQS > X%,
you can set for X% = 50%...100%,
only one FQS every Timer unit, Timer = 0 drop all immediately,
Auto-Drop and Manual-Drop FQS,
CleanUp and Manual-Drop FQS have not restrictions (clean all FQS),
CleanUp and Manual-Drop FQS with enableable Beep.
= High Queue Rating Sources (HQRS)
Auto-Drop HQRS only from DL Queue,
Auto-Drop if HQRS > X% and first highest Queue Rating Source,
you can set for X% = 50%...100%,
only one HQRS every Timer unit, Timer = 0 drop all immediately,
Auto-Drop and Manual-Drop HQRS,
CleanUp and Manual-Drop HQRS have not restrictions (clean all HQRS),
CleanUp and Manual-Drop HQRS with enableable Beep.[/color]
FEATURE: Save/Load sources
= Save/Load works only on HIGH priority
= Save only Valid Sources, max. 35 VS

分享到 淘江湖新浪 QQ微博 QQ空间开心人人豆瓣网易微博百度鲜果白社会飞信

详细信息请点击图片↑

回复引用

举报顶端

阿苏

级别: 工作组

注册时间:: 2001-11-21

在线时间:: 0小时

发帖:: 3869

只看该作者 40楼发表于: 2003-07-05

功能: 根据有效的来源自动设定优先级
=在硬件限制栏你可以看到有效来源/硬件限制
=自动设定动态硬件限制参数(50...1000增长或降低取决于下载中文件的优先级)
=硬件参数的刷新取决于计时器的数值
=每个文件的硬件限制将更具参数设定中的一般使用硬件设定被初始化
有效资源= 10...20, 自动优先设定和手动优先设定 => 自动硬件限制 = 50...125, 增加25%左右
有效资源= 21...30, 自动优先设定和手动优先设定 => 自动硬件限制 = 84...144, 增加20%左右
有效资源= 31...40, 自动优先设定 => 自动硬件限制 = 103...154, 增加15%左右
有效资源= 41...260, 手动优先设定 => 自动硬件限制 = 103...1000, 增加15%左右
否则硬件限制每个50时间单位降低1%左右
=优先级一般或自动[一般]:
有效资源 = 17...55, 手动优先设定 => 自动硬件限制 = 50...172, 增加10%左右
有效资源 = 41...55, 自动优先设定 => 自动硬件限制 = 118...172, 增加10%左右
有效资源 = 56...75, 自动优先设定和手动优先设定 => 自动硬件设定 = 140...203, 增加9%左右
有效资源 = 76...100, 自动优先设定和手动优先设定 => 自动硬件设定 = 169...239, 增加8%左右
有效资源 = 101...130, 自动优先设定和手动优先设定 => 自动硬件设定 = 202...278, 增加7%左右
有效资源 = 131...160, 自动优先设定 => 自动硬件设定 = 238...307, 增加6%左右
有效资源 = 161...519, 手动优先设定 => 自动硬件设定 = 238...1000, 增加6%左右
否则硬件限制每个50时间单位降低1%左右
= 优先级低或自动[低]:
有效资源 = 30...195, 手动优先设定 => 自动硬件设定 = 50...341, 增加5%左右
有效资源 = 161...195, 自动优先设定 => 自动硬件设定 = 268...341, 增加5%左右
有效资源 = 196...235, 自动优先设定和手动优先设定 => 自动硬件设定 = 301...375, 增加4%左右
有效资源 = 236...280, 自动优先设定和手动优先设定 => 自动硬件设定 = 337...412, 增加3%左右
有效资源 = 281...330, 自动优先设定和手动优先设定 => 自动硬件设定 = 374...448, 增加2%左右
有效资源 = 331...792, 自动优先设定和手动优先设定 => 自动硬件设定 = 413...1000, 增加1%左右
否则硬件限制每个50时间单位降低1%左右]

功能: 更大范围的处理NNS, FQS和HighQRS资源
=对自动高优先级,自动NNS,自动FQS和自动HQRS分配独立计时(0...60秒)
=不需要的来源 Not Needed Sources (NNS)
排队中自动放弃不需要的来源
当不需要的来源数高于X%时自动放弃下载
X%可以设定为50%...100%
每个时间单位一个不需要的来源, 时间为0的话立刻全部放弃
自动或手动放弃不需要的来源
尝试交换到另一个文件
清除或手动放弃不需要的来源没有限制(清楚所有不需要的来源)
清除或手动放弃不需要的来源时可开启声音提示(放弃不需要的来源时播出声音信号)
=列队已满的来源 (FQS)
排队中自动放弃列队已满的来源
当列队已满的来源数高于X%时自动放弃下载
X%可以设定为50%...100%
每个时间单位一个列队已满的来源, 时间为0的话立刻全部放弃
自动或手动放弃列队已满的来源
清除或手动放弃列队已满的来源没有限制(清楚所有不需要的来源)
清除或手动放弃列队已满的来源时可开启声音提示
=高排队等级的来源 (HQRS)
排队中自动放弃高排队等级的来源
当高排队等级的来源数高于X%时自动放弃下载
X%可以设定为50%...100%
每个时间单位一个列队已满的来源, 时间为0的话立刻全部放弃
自动或手动放弃高排队等级的来源
清除或手动放弃高排队等级的来源没有限制(清楚所有不需要的来源)
清除或手动放弃高排队等级的来源时可开启声音提示

功能: 保存/提取来源
=保存/提取只对高优先级的文件起作用
=只保存有效的资源, 最高35 VS

hiei要我替柯南翻的...太热了...就翻了后面一半...大家慢慢看...我继续趴...热...