伽玛亮度，AVS帮助里就写了：
Levels (clip, int input_low, float gamma, int input_high, int output_low, int output_high, bool "coring")
The Levels filter adjusts brightness, contrast, and gamma (which must be > 0). The input_low and input_high parameters determine what input pixel values are treated as pure black and pure white, the output_low and output_high parameters determine the output values corresponding to pure black and white and the gamma parameter controls the degree of nonlinearity in the conversion. To be precise, the conversion function is:
output = [(input - input_low) / (input_high - input_low)]1/gamma (output_high - output_low) + output_low
This is one of those filters for which it would really be nice to have a GUI. Since I can't offer a GUI (at least not in AviSynth's current form), I decided I could at least make this filter compatible with VirtualDub's when the clip is RGB. In that case you should be able to take the numbers from VirtualDub's Levels dialog and pass them as parameters to the Levels filter and get the same results. However, the input and output parameters can be larger than 255.
When processing data in YUV mode, Levels only gamma-corrects the luma information, not the chroma. Gamma correction is really an RGB concept, and I don't know how to do it properly in YUV. However, if gamma = 1.0, the filter should have the same effect in RGB and YUV modes. For adjusting brightness or contrast it is better to use Tweak or ColorYUV, because Levels also changes the chroma of the clip.
In v2.53 an optional coring = true/false (true by default, which reflects the behaviour in older versions) is added. When setting it to true, it means that the luma range is clipped to [16,235] for both the input and output (this means that [0,16] is mapped to 16, and [235,output_high] to 235). When setting it to false it means that the luma range is clipped to [0,255] (this means that the output [255,output_high] is mapped to 255).
# does nothing on a [16,235] clip, but it clips (or "clamps") a [0,255] clip to [16,235]:
Levels(0, 1, 255, 0, 255)
# the luma is clipped to [16,235] and the conversion [0,255]->[16,235] takes place:
# example: the luma values in [0,16] are all converted to 30
Levels(0, 1, 255, 16, 235)
# gamma-correct image for display in a brighter environment:
# example: luma of 16 stays 16, 59 is converted to 79, etc.
Levels(0, 1.3, 255,0, 255)
# invert the image (make a photo-negative):
# example: luma of 16 is converted to 235
Levels(0, 1, 255, 255, 0)
# does nothing on a [0,255] clip; does nothing on a [16,235]:
Levels(0, 1, 255, 0, 255, coring=false)
# scales a [0,255] clip to a [16,235]:
Levels(0, 1, 255, 16, 235, coring=false) # this is the same as ColorYUV(levels="PC->TV")
# scales a [16,235] clip to a [0,255]:
Levels(16, 1, 235, 0, 255, coring=false) # this is the same as ColorYUV(levels="TV->PC")
